34
Rev. 0.6
[email protected] • www.e-breathe.de
e-breathe e-Flow
4. Application/Usage
Check the equipment for completeness and for any transport damages.
Perform a visual inspection of all components before storing the goods and before using the system.
New batteries are in sleep mode and must be fully charged prior to first use and preferably also prior to prolonged
storage. If the battery has not been used for a longer period of time, it will automatically return to sleep mode to
prevent the battery from deep discharging.
If you can foresee that the device will not be used, make a note of the last complete battery charge.
4.1 Unpacking/Visual Inspection
4.2 Assembly/Disassembly e-Flow for Use
4.2.1 Assembly/Disassembly Belt and Carrying System
At the back of the blower you will find the attachment for the belt / carrying system.
Belt Mounting:
If you use a simple belt, you must remove the buckle.
Continue by pulling the side of the belt without the buckle through the two belt holders. Make sure that the belt
does not twist and that the front of the buckle is facing outwards of the blower. Reinstall the buckle you previously
removed.
Belt Disassemble:
Remove the buckle and pull the belt with the side without the buckle through the blower belt mountings to disas-
semble the belt.
Carrying System Assemble:
Open the quick release buckle on the carrying system and pull out the strap.
See Figure 1.
Thread the strap into the first loop of the carrying system. -> Continue through the first opening on the blower. ->
Then insert the strap into the middle loop of the carrying system. -> Then through the second opening on the blower.
-> Next the strap through the last loop on the carrying system.
See figure 2.
Tighten the strap firmly to tension it. Continue threading the strap through the quick-release buckle. Keep the strap
tensioned to ensure that the blower is firmly and securely attached to the carrying system. Close the quick-release
buckle while the strap remains tensioned.
See Figure 3
Disassemble carrying system:
Open the quick-release fastener.
Hold the blower in your hand and pull the carrying system backwards. In this way, the previously threaded strap is
released from the blower.
Important!
Please look at the instruction manual of the respective accessory product.
Please read the instruction manual carefully and see over the figures to avoid operation failures.
