ENGLISH
4
2.
Getting Started
2.1 Extend the digital photo frame bracket on the back of the frame to the
widest position for greatest stability, and then plug one end of the included
AC adapter into a standard 110-240V AC electrical outlet and the other
end into the right side the frame.
2.2. Remove the protective film covering the LCD.
2.3. Remove the plastic battery insulator from the battery compartment
and make sure the remote control has a battery inside. Please refer to
“Installing& Replacing Battery” if you need a new battery.
2.4. Power on the unit by pressing the Power button at the backside of the
unit (Press ON/OFF button for a longer period).
3. Operating Instruction
3.1 Card and USB
After turning on the unit, it will show the startup picture, press
MENU
to get
to the card select interface.
Note:
Make sure there are supported picture files in the Card or USB
device.
It supports SD/SDHC/MMC and
USB 2.0. After inserting a card or
USB device, slideshow will play
automatically, then press
MENU
twice to access to photo, file,
calendar and setup. Press
to
confirm.
