Date March 2019
Akku Vision - Manual PowerPack for Gazelle
S.
8
/
10
Version 06
*Gazelle and Innergy are trademarks of the Koninklijke Gazelle N.V. NL
Break up of charging process
•
To complete the charging, switch off the charger and unplug the charging plug of the battery. Reattach the
cap of the charging socket and pull the power plug of the charger from the wall socket.
•
If you charged your battery within your eBike, so please turn off and on your drive system, so that it can
calculate the range.
Charging with your original charger is completed, as soon as all LEDs are lighting permanently.
With the E-Bike Vision fast charger, charging is completed, as soon as all LEDs of the battery are lighting and
charger LED is lighting solid green or red.
If the charger’s LED lights red, this is no cause for concerns. This can signalise for example, that the battery
management system has finished charging for balancing the individual cell voltages of the installed cells. This
ensures the lifetime and the safety of your battery.
Charging time
The battery with a capacity of 10,4 Ah requires about 6 hours to be fully charged with the standard charger and
about 1.5 hours with our fast charger.
The battery with a capacity of 13,6 Ah requires about 7 hours to be fully charged with the standard charger and
about 2 hours with our fast charger.
The battery with a capacity of 11,4 Ah requires about 6 hours to be fully charged with the standard charger and
about 1.5 hours with our fast charger.
Battery usage
ATTENTION: For using the battery with a Innergy XT/Orange drive system, your dealer has to pair it with your
drive system. Please ask you dealer, he will do it for you!
Please consider the safety instruction given earlier during usage of your E-Bike Vision PowerPack.
Your PowerPack will enter automatically into deep-sleep-mode (if it is not installed in the eBike) after approx. 1
hour to prevent itself of self-discharging. Also, it will shut down the drive system after 10 minutes of no use of
the eBike.
Take care, that the battery is in its correct position, before inserting. If not, you can damage the battery’s housing.
Before each use of PowerPack, it must be activated by pushing the capacity indicator button or by pushing the
ON / OFF switch of the HMI.
Do not press the capacity indicator button several times in quick succession, this activates and deactivates the
battery once again.
You installed your new E-Bike Vision PowerPack correctly in your eBike and locked it (do not forget to remove the
key)? Then turn on the drive system by the capacity indication button or via the ON /OFF switch of your HMI. The
drive system now read the current capacity of the battery and will calculate the approximated range, based on your
previous driving profile. The drive system is ready for use as soon as the speed is displayed.