Copyright © 2021 DASAN Zhone Solutions
Document Number: 830-04383-01
MR-2100AC-XX/W1615MR-XX
Quick Installation Instructions
Document Number: 830-04406-01
February 2021
Package Contents:
•
1 x MR-2100AC-XX or W1615MR-XX
•
1 x Quick Install Guide
•
1 x Power supply
Installation
For installations with more than one
MR-2100AC-XX/W1615MR-XX, select one unit to be used as
the main MESH controller and follow the instructions presented
on the current document.
1. Mounting
The MR-2100AC-XX/W1615MR-XX may be mounted on
flat surfaces such as a desktop. The
MR-2100AC-XX/W1615MR-XX is equipped with an
extendable base to enhance stability.
2. Connect Power
a. Plug the round two pin 12V DC power connector of
power converter into the
MR-2100AC-XX/W1615MR-XX power port
b. Plug the input of power converter into a live AC outlet
c. Verify that the POWER LED on the
MR-2100AC-XX/W1615MR-XX is solid white
indicating local power is on and voltage is good
See
MR-2100AC-XX/W1615MR-XX LED Behavior
for a complete description of the LEDs.
3. Configuring SSID and Wi-Fi Key (Optional)
This step is optional. Each MR-2100AC-XX/W1615MR-XX
comes with a set of default Wi-Fi SSID and passphrase
located on the bottom information label. If using the
defaults, step 3 (this step) may be skipped.
a. Power up the MR-2100AC-XX/W1615MR-XX as
described in the previous step,
Connect Power
. This
is the main MESH controller
b. Use a UTP cable between
MR-2100AC-XX/W1615MR-XX Ethernet ports and a
PC Ethernet port
c. Configure a fixed IP address on your PC, for example
192.168.1.101 (for detailed instructions refer to your
operating system documentation; for Windows OS
follow these instructions
https://support.microsoft.com/
en-us/help/15089/windows-change-tcp-ip-settings
)
d. Open a web browser and input http://192.168.1.100
e. When prompted for credentials enter "admin" as user
and for password "DZSXXXXXXXXX" where
"XXXXXXXXX" is the 9-digit serial number found on
the unit label
f.
Navigate to WiFi > EasyMesh > Advanced
g. Click Configure BSS
h. Click Edit BSS
i.
Change
SSID
j.
Change Password
k. Click Save and Apply
l.
If needed repeat for
2.4Ghz Wi-Fi
NOTE:
by default, when changing the configuration of
the 5GHz radio, the configuration of the SSID and
passphrase will be replicated on all radios and all
access points forming part of the MESH ecosystem.