dyras ESI-2400AC, Instruction Manual, Page: 10 / 77

ESI-2400AC
10
recommended ironing settings for different fabrics:
Warning: if your clothing is made from a combination of different materials (‘mixed fibres’), you should set the
iron temperature for the fabric that requires the lowest temperature.
filling the water tank:
Warning! Never fill or empty the water tank unless the iron is switched off and unplugged from
the mains. If the water tank becomes empty during use, switch the iron off and wait until it cools
down before refilling it.
• The water tank contains a built-in de-scaling unit. This means you don’t usually need to use distilled
(demineralised) water. However, if you live in a ‘hard water’ area or find that you frequently need to activate
the self-cleaning process for the iron, you should use distilled water to keep the iron working properly.
Please note that the de-scaling unit is sealed in the water tank and cannot be removed.
• Distilled water can be purchased in shops and at petrol stations. Do not use chemically demineralised or
treated water. Never put any other liquid in the water tank.
• When filling the water tank, ensure the steam control and temperature control are both set at their minimum
positions. Do not press any controls when filling the iron.
• Always use an appropriate container (e.g. a small jug) to fill the water tank and never hold the iron under
a tap. Take care not to spill any water when filling the tank; always wipe any drips from the body before
connecting the iron to mains power.
Label mark fabric type fibre type Position of temperature dial
synthetic
acrylic, modacrylic
polypropylene, polyurethane
• - 1 dot
synthetic acetate, triacetate • - 1 dot
synthetic
cupro, polyamide (nylon),
polyester, modal, viscose
• - 1 dot
silk silk • • - 2 dots
wool wool • • - 2 dots
cotton cotton • • • - 3 dots
linen linen • • • - 3 dots or max.
Note: Do not iron this fabric
10