EN
DYON SMART 43 X-EOS
19
Note on batteries
Alkaline Batteries are recommended.
Remove the batteries when they are exhausted or if the
remote control is not be used for a long time.
If the remote control is not used for a long period of time,
please remove the battery from the compartment.
Do not heat batteries or dispose of them in fires.
Do not dismantle, deform or modify batteries.
7.5
Antenna connection
Connection for DVB-T2 reception or cable TV
Connect the signal cable (e.g. the antenna cable) to the
antenna input (RF) on the back of the device.
After connection, switch on the device. Press the
button
and select
“All Settings”. Now select “Programmes” and
t
hen “Programme Tuning & Settings”. In the next step, select
under “Auto Tuning” Cable or Antenna, set the desired settings
and now perform the channel search.
Note on DVB-T
Whether and how many transmitters can be received
depends on the location of the device and the availability
of DVB-T transmitters in this region. DVB-T radio
stations are only available in very few regions.
Please note that when using DVB-T, a new station
search should be performed every time you change
location.
Broadcast stations and their transmission frequency vary
from region to region.
