EN
DYON SMART 42 AD
21
7.5
Antenna Connection
Connection for DVB-T2 reception or cable TV
Connect the signal cable (e.g. the antenna cable) to the
antenna input (RF) on the back of the device.
After connection, switch on the device. Perform the initial
installation or press the Menu button
, then press the
button to enter the Channels menu. Now select "new channels
available" on the right and confirm with the OK button. In the
next step, press the
button to change to "Tuner (DTV)" and
press the OK button
. Now select “Antenna/Cable” and confirm
“Antenna” in the next step. Now carry out the channel search
with a confirmation with the OK button on the field "Scan".
Note on DVB-T
Whether and how many transmitters can be received
depends on the location of the device and the availability
of DVB-T transmitters in this region. DVB-T radio stations
are only available in very few regions.
Please note that when using DVB-T, a new station search
should be performed every time you change location.
Broadcast stations and their transmission frequency vary
from region to region.
Notes on batteries
If the remote control is not used for a long period of time,
please remove the battery from the compartment.
Do not heat batteries or dispose of them in fires.
Do not dismantle, deform or modify batteries.
