Dynojet Power Comander V Installation Download Page 1

Page: 1 / 4

11-008

www.powercommander.com

2010-2012 Arctic Cat 450 H1 - PCV - 1

PARTS LIST

Power Commander

USB Cable

Installation Guide

Power Commander Decals

2 Dynojet Decals
1

Posi-tap

Velcro strips

1 Alcohol swab

THE LATEST POWER COMMANDER

SOFTWARE AND MAP FILES CAN BE

DOWNLOADED FROM OUR WEB SITE AT:

www.powercommander.com

2010-2012 Arctic Cat 450 H1

I n s t a l l a t i o n I n s t r u c t i o n s

PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION

THE IGNITION MUST BE TURNED

OFF BEFORE INSTALLATION!

2191 Mendenhall Drive North Las Vegas, NV 89081 (800) 992-4993 www.powercommander.com

Summary of Contents for Power Comander V

Page 1: ...lcro strips 1 Alcohol swab THE LATEST POWER COMMANDER SOFTWARE AND MAP FILES CAN BE DOWNLOADED FROM OUR WEB SITE AT www powercommander com 2010 2012 Arctic Cat 450 H1 Installation Instructions PLEASE...

Page 2: ...p and the other position will let you activate the learning mode When the switch is CLOSED Autotune will be activated Set to Switch Input 1 by default Shifter Input 1 or 2 These inputs are for use wit...

Page 3: ...ough the opening under the storage cover as shown in Figure B 4 Using the supplied Velcro secure the PCV module under the seat at the location shown in Figure C Make sure to clean both surfaces with t...

Page 4: ...CV wiring harness in line of the stock wiring harness and the fuel injector 9 Locate the Throttle Position Sensor TPS on the left hand side of the throttle body 10 Using the supplied posi tap attach t...