![Dynex DX-FMRDS User Manual Download Page 6](http://html.mh-extra.com/html/dynex/dx-fmrds/dx-fmrds_user-manual_2550339006.webp)
6
Using the mobile FM
transmitter and charger
To set up and use your mobile FM transmitter and
charger:
1
Insert the mobile FM transmitter firmly into your car’s
cigarette lighter or power socket.
2
Tune your car's FM stereo to an unused FM frequency.
3
Plug the connector on the end of the cable into your
iPod.
Note:
To disconnect, unplug it from your iPod.
4
Start your iPod player. Your mobile FM transmitter
turns on when an audio signal is detected.
5
Select the frequency from Step two above using the
up and down arrows on the front of your mobile FM
transmitter.
Tip:
The mobile FM transmitter works best
when the iPod volume is set between 50%
to 75% of maximum. After you have tuned
to the frequency and begun transmitting,
adjust the volume to a comfortable level.
Tip:
Your iPod may not automatically turn
off. Be sure to unplug it to stop playback
and to deactivate charging before exiting
your car.
Summary of Contents for DX-FMRDS
Page 12: ...12 ...
Page 24: ...24 5 Letitredelachansonestautomatiquementaffichésur le récepteur FM après quelques secondes ...
Page 44: ...44 ...
Page 49: ...49 ...