Dynex DX-EBDTC, User Manual

Page: 9 / 86

Setting up your wireless card 9
4 Click Next . The InstallShield Wizard Complete screen opens.
5 Click Yes, I want to shutdown my computer now , then click Finish . Your
computer shuts down.
Note : If at any time during the installation a warning appears that the software has not
passed Windows logo testing, click Continue anyway . This software is designed to run
on Windows.
Installing the wireless card
Caution : Before touching any electronic components, make sure that you first touch an
unpainted, grounded metal object to discharge any static electricity stored on your
clothing or body.
To install the card:
1 Shut down your computer, then unplug the power cord.
2 Remove your computer's case cover. See your computer's user guide for information
about removing the cover.
3 Locate an available PCI slot. PCI slots are usually white. Keep in mind that the included
antenna needs to be oriented with the top pointing up. If there are cables and other
connectors in the way, pick the PCI slot that has the fewest obstructions to the correct
positioning of the antenna.
4 Remove the screw that secures the backplate (the small piece of metal that covers the
opening for the PCI card on the back panel of your computer), then remove the
backplate.
5 Carefully insert the card into the PCI slot. Do not touch the metal connector on the
card. Apply pressure as needed until the connector is fully seated.