Dyness PowerDepot H5B, User Manual

Page: 14 / 33

PowerDepot H5B series User Manual
8
3.1.2 Tools and data
Tools and meters that may be used for installation are shown in table 3-1.
Table 3-1 Tool instrument
Name
Screwdriver
（
Slotted
、
Phillips
）
Multimeter
Torque wrench Clamp current meter
Diagonal pliers Insulation tape
Pointed nose pliers Temperature meter
Pliers to hold the wire Anti-static bracelet
Stripping pliers Cable tie
Electric drill Tape measure
3.1.3 Technical preparation
Electrical interface check
Devices that can be connected directly to the battery can be user’s equipment, power
supplies , or other power supply equipment.

Confirm whether the user’s equipment, the PV equipment or other power supply
equipment has the DC output interface, and measure whether the output voltage
of the interface meets the requirements of the voltage range of table 2-2

Verify the maximum discharge current capacity of the user’s equipment, the PV
equipment or other power supply equipment. The DC standby interface, and the
maximum discharge current shall be higher than the maximum charging current of
the products used in table 2-2.

If DC interface maximum discharge capacity of the user’s equipment is less than the
maximum charging current of products using in table 2-2, the user’s interface
should have the power equipment of DC current limiting function to ensuring the
normal work of user equipment.
The security check

Firefighting equipment should be arranged near the equipment, such as portable
dry powder fire extinguisher.

Automatic fire fighting system shall be provided for the case where necessary.

Flammable, explosive and other dangerous materials placed beside the battery are
prohibited.
3.1.4 Unpacking inspection

When the equipment arrives at the installation site, loading and unloading should
be carried out according to the rules and regulations, so as to prevent from being
exposed to sunlight and rain.

Before unpacking, the total number of packages shall be indicated according to the
shipping list attached to each package, and the case shall be checked for good
condition.