background image

Mount Bracket To Wall

1

NOTE:

?

For ease of installation mount bracket on wall using position 1 and 

mark other positions using a spirit level. Then remove fixings from 
position 1, remove bracket and drill other positions

?

Use Fixings suitable for your type of wall construction.

?

Use All available fixing points

?

If in any doubt of the suitability of the wall, it's construction or what 
type of fixings to use, consult a qualified builder or installer.

?

Read these instructions carefully before installing your equipment.

?

Install the wall bracket in a suitable location using fixings which are appropriate for the wall material and 
structure. Consult a qualified builder if you are in any doubt as to the structural integrity of the wall.

?

Do not attempt to alter or modify any part of the wall mount or it's attachments.

?

Do not use if any parts are broken or appear to be damaged.

?

 Tighten all bolts and fixings securely. Only use fixings provided with this bracket.

?

 Do not mount your tv near to sources of heat or moisture.

?

 Always have a minimum of two persons to install the wall bracket and tv.

1

1

Home Systems

Professional

Automotive

Multimedia

Performance TV Wall Bracket (37" to 55" TVs)
Instruction Manual

TV

4

TV Fixing Kit

A

 - M4 x 20mm

B

 - M5 x 20mm

C

 - M6 x 20mm

D

 - M8 x 25mm

E

 - M8 x 35mm

J

 - M6 x 16mm

K

 - M8 Nut

- M4

G

 - M5

x2

x8

H

 - M8

I

 - M6

x4

x4

x4

x4

I

  - M6

J

 - M8

M

 - M5

N

 - M4

ENG

Summary of Contents for TV4







Reviews: