DYNATEK DFCM-1 User Manual Download Page 1

Page: 1 / 5

Part# DFCM-1

Dynatek • 164 S. Valencia St. Glendora CA 91741

www.dynaonline.com

800.928.3962

User Manual

Parts List

FI Controller
Installation Guide
Wire tap
Wire ties
Velcro

Strip

Alcohol Swab

2002-2005 Honda VTX1800

Part Number DFCM-1

2801191

Rev 06-28-05

Congratulations on your purchase of this Dynatek product.

Please take a moment to read these instructions completely before

installing the FI controller. The installation will only take a few minutes,

but proper setup for your specific bike will take longer

Summary of Contents for DFCM-1

Page 1: ... Wire ties Velcro Strip Alcohol Swab 2002 2005 Honda VTX1800 Part Number DFCM 1 2801191 Rev 06 28 05 Congratulations on your purchase of this Dynatek product Please take a moment to read these instructions completely before installing the FI controller The installation will only take a few minutes but proper setup for your specific bike will take longer ...

Page 2: ...cover Connect the FIC ground to the battery ground Reinstall the battery cover and reinstall the ECU Using the supplied velcro mount the FIC Route the wiring harness from the FIC under the tank and through the frame STEP 1 STEP 3 STEP 2 Installation Part DFCM 1 2 STEP 3 STEP 2 STEP 1 ...

Page 4: ...a yellow stripe Using the supplied wire tap tap into that wire Make sure that the tap is on the wire securely Connect the grey wire from the FIC harness to this connector Reinstall the seat and airbox assembly STEP 7 STEP 7 Installation Part DFCM 1 4 ...