background image

To Customers 

 
Thank you very much for using our Dynascan FM VHF/UHF Two Way Radio. This 
radio of   
modern design is reasonable structure with stable functions. It is designed to   
meet customer's needs for the high quality with easy operation and perfect capability. 
We believe you are pleased with the finished shape and the reasonable price. 
This manual is suitable for using the model of Dynascan R58 
 
 

CAUTIONS: 
 

  Before use this radio may need get local government authorization. 

  DO NOT operate the radio without a proper antenna attached, as this may 

damage the radio and may also exceed exposure limits 

  Refer service to qualified technicians only. 

  Turn off the radio while taking on fuel or while parked in a gasoline service 

station. 

  Do not expose the radio to long periods of direct sunlight, nor place it close 

to heating appliances. 

  If it appears that the radio diffuses peculiar smell or smoke, please shut off 

its power immediately, then contact with the nearest dealer. 

 

Don’t keep the radio transmitting too long .It may be too hot to hurt body or 
damage the radio itself. 

  Please  turn  off  the  radio  before  entering  the  inflammable  and  explosive 

environment. 

 

 

CHECKING EQUIPMENT 
 

  Welcome to use our radio. Please check if any damage to the packing box 

before use. Carefully unpacks the radio. We recommend that you identify 
the items listed in the following table. If any items are missing or have been 
damaged during shipment, please inform the seller. 

 

 

SUPPLIED ACCESSORIES 

 

Summary of Contents for R-58
















Reviews: