Dynapac V5100TV-H, Application, Operation & Maintenance

Page: 150 / 196

F 14
6.3 Checking / adjusting the tamper de-
flector plate
Before each laying operating, check the
tamper adjustment.
The tamper knife (1) should touch the
knife bar ((2) on the screed).
The play (a) between the tamper deflec-
tor plate (3) and the tamper knife (1)
should be 0.5 mm across the entire
width.
A
If correction is necessary: See chapter E.
6.4 Cleaning the screed with high pressure cleaners
Caution! Possible damage to parts
When cleaning is performed with a high pressure cleaner,
it is possible for parts to be damaged by the jet of water:
- Do not spray bearing positions, lubricate correctly
after cleaning.
- Cover electric or electronic components, do not spray
with water.
- Do not spray parts of the gas heater (
o
), cover
these first.
Possibly dry the nozzles and filter of the gas system and
readjust the air supply.
EB51_Verstell6.bmp
3
1
a
2
NOTE