Dynapac DRP15X, Operating Instruction

Page: 98 / 112

NOTICE!
Components can be damaged by water
entering into the system!
– Do not direct the water jet directly into the air
filter, carburettor, recoil starter, air intake or
starter switch.
3. Clean the machine with a water jet.
4. Run the engine warm for a while to avoid corrosion.
8.10.7 Measures for longer shut-down periods
8.10.7.1 Measures before shutting down
DANGER!
Danger to life caused by explosive gas-air
mixes!
– Do not allow gasoline to come into contact with
hot components.
– Smoking and open fire is prohibited.
– Keep away from heat sources, sparks and
other sources of ignition.
– Do not spill any gasoline.
If the machine is shut down for a longer period of time, e.g. winter
season, the following work must be carried out.
Depending on weather conditions these conservation measures
will protect the machine for approx. 6 to 12 months.
1. Park the machine in secured condition Ä Chapter 6.5
„Parking the machine in secured condition“ on page 60 .
2. Allow the engine to cool down for at least 30 minutes.
3. Clean the machine thoroughly.
4. Change the engine oil Ä Chapter 8.7.1 „Changing the engine
oil“ on page 77 .
5. Use fuel stabilizer or drain off fuel completely.
1. Mix fresh fuel with fuel stabilizer (follow the instructions of the
manufacturer).
2. Empty the fuel tank and fill it with the prepared fuel mix.
3. Start the engine and run the machine for approx. 10 minutes
in the open.
4. Park the machine in secured condition.
Using fuel stabilizer
Maintenance – As required
DRP15X 98