Dynapac DFP9, Operating Instructions Manual

Page: 84 / 112

CAUTION!
Danger of injury caused by uncontrolled
machine movement!
– Always hold on to a running machine.
– Always keep an eye on a running machine.
Protective equipment: n Working clothes
n Hearing protection
n Safety shoes
Special tool: n Sirometer
1. Park the machine on a rubber mat.
2. Start the engine
Ä
Chapter 6.2 „Starting the
engine“ on page 55 .
3. Run the machine at maximum speed for one minute.
4. Check the base plate’s frequency with a suitable measuring
instrument (e.g. Sirometer).
ð
Nominal value:
Ä
Chapter 2 „Technical
data“ on page 11
5. Park the machine safely
Ä
Chapter 6.5 „Parking the machine
in secured condition“ on page 62 .
6. If frequency incorrect:
n Check the engine speed.
n Check the V-belt.
n If necessary, contact our customer service.
8.8.4 Cleaning the slurry filter and fuel strainer
DANGER!
Danger to life caused by explosive gas-air
mixes!
– Do not allow gasoline to come into contact with
hot components.
– Smoking and open fire is prohibited.
– Keep away from heat sources, sparks and
other sources of ignition.
– Do not spill any gasoline.
Protective equipment: n Working clothes
n Protective gloves
1. Park the machine in secured condition
Ä
Chapter 6.5
„Parking the machine in secured condition“ on page 62 .
2. Allow the engine to cool down.
Maintenance – Annually
DFP9 84