Dynapac D.ONE, Operating Instructions Manual

Page: 56 / 190

4.4.2 Vibration pre-selection toggle switch
Position “front” Pre-selection “automatic”
Vibration is automatically switched on or
off when the travel speed exceeds or
falls below a certain value.
Position “rear” Pre-selection “manual”
Vibration is switched on or off using the
vibration toggle switch.
4.4.3 Toggle switch for travel ranges
Position “front” Travel speed range 2
Position “rear” Travel speed range 1
Vibration is automatically switched off in travel
speed range 2.
4.4.4 Engine speed toggle switch
Position “front” Full load position
Position “rear” Idle speed position
B-720-0026
Fig. 35
B-720-0021
Fig. 36
MAX
MIN
B-720-0020
Fig. 37
Indicators and control elements – Remote control
D.ONE 56