Installation, Operation and Service Manual
LKP Series 4 Channel OEM
© 2019 DynAmp, LLC
Page 27
041593O
6.4 SPARE PARTS ORDERS - ROUTINE OR EMERGENCY
Requests for spare parts should be directed to "Service" at DynAmp, LLC during normal hours.
When contacting us, please present as much information as possible, such as the related
equipment Model and Serial Numbers (available on the equipment tag); the required part name;
its DynAmp, LLC item number (and other identifying or vendor number(s); and your time needs.
An approved Purchase Order Number should be given with your order.
6.5 RECOMMENDED SPARE PARTS
The following table lists the minimum recommended quantities for spare parts for the LKP
Series 4 Channel OEM. As spares are used, replacements should be ordered. Since
continuous operation of high-current measurement systems is usually critical, stocking spare
parts should be given high priority.
The LKP-15 & LKP-30 Measuring Heads require special repair procedures and materials.
However, the Measuring Heads are very reliable and should require little or no repair over its
service life. Please refer to the nearest authorized DynAmp service center for information on
repairs.
Table 6.1
Spare Parts List *
DESCRIPTION
ITEM
NO.
RECOMMENDED
QUANTITY
Metering Unit
Kit, Spare Parts, LKP-6 OEM
42775
1
Kit, Spare Parts, LKP-12 OEM
42776
1
Kit, Spare Parts, LKP-15 OEM
42777
1
Kit, Spare Parts, LKP-30 OEM
42778
1
Spare Parts Kit includes Module and Fuses as one
package.
Module, 4 Channel OEM, LKP-6 & 12
41341
1
Module, 4 Channel OEM, LKP-15 & 30
43767
1
**Fuses, LKP-6 (channel fuse, ½ Amp) (5 per box)
03528
1 box
**Fuses, LKP-12 (channel fuse, 1 Amp) (5 per box)
12590
1 box
**Fuses, LKP-15 (channel fuse, 2 Amp) (5 per box)
26192
1 box
**Fuses, LKP-30 (channel fuse, 3 Amp) (5 per box)
12591
1 box
Option
***Accuracy Diagnostics PC Board, LKP-6 & 12
41946
1
***Accuracy Diagnostics PC Board, LKP-15 & 30
41314
1
* For one to five units, stock the quantities shown. For six or more units, a complete system
(Measuring Head, cable, and Metering Unit) should be kept on hand.
** All Fuses are Time lag MDA Style 3AB ¼” by 1 ¼” (6.3 mm x 32mm), 250 Volt
*** Only required if accuracy diagnostics option is installed.
Disconnect power to the system before servicing or replacing fuses.
