cables to protect them from damage. Replace damaged components. Check for and remove
any foreign objects or material.
l
Every 6 months, test all switchable functions on the Dynamic Controls electronics system to
ensure they function correctly.
Warning
:
There are no user-serviceable parts in any Dynamic Controls electronic component. Do not attempt to open any
case or undertake any repairs, else warranty will be voided and the safety of the system may be compromised.
Warning
:
If any component is damaged in any way, or if internal damage may have occurred (for example by being dropped),
have it checked by qualified personnel before operating.
Where any doubt exists, consult your nearest service centre or agent.
10.5 Warranty
All equipment supplied by Dynamic Controls is warranted by the company to be free from faulty
workmanship or materials. If any defect is found within the warranty period, the company will repair
or, at its discretion, replace the equipment without charge for materials or labour.
This warranty is subject to the provisions that the equipment:
l
has been correctly installed;
l
has been thoroughly checked upon completion of installation, and all programmable options
correctly adjusted for safe operation prior to use;
l
has been used solely in accordance with this manual and all other manuals of the Dynamic Con-
trols electronic components that are used on the wheelchair;
l
has been properly connected to a suitable power supply in accordance with this manual;
l
has not been subjected to misuse or accident, or been modified or repaired by any unauthor-
ised personnel;
l
has been used solely for the driving of electrically powered mobility wheelchairs in accordance
with the intended use and the recommendations of the wheelchair manufacturer;
l
has not been connected to third party devices without the specific approval of Dynamic Con-
trols.
10.6 Safety and misuse warnings
10.6.1 Warnings to be included in the user manual
The DX2-RJM, DX2-RJM-LF and DX2-ACU remote modules are part of the DX System and therefore all
safety and misuse warnings that appear in the DX System Manual apply to the DX2-RJM, DX2-RJM-LF
and DX2-ACU remote modules — see the Safety and Misuse warnings in the DX System Manual
appendices.
In addition, the following warnings and advice must be passed on to the end user before use of the
product.
l
In the case of an emergency while the vehicle is driving, press the power button to perform an
emergency stop and turn the controller off.
l
If there is a risk of collision with a person or object in close proximity, use the joystick and/or
speed selector to reduce the speed of the wheelchair.
GBK65701 DX2 Compact Remote Modules
Installation Manual Issue 1
Appendices - Page 47