Installation Instructions for Call Saver
®
Pro™
CSP-2 Telephone Recording & Playback Kit
FOR LEGAL USE ONLY
5-20-09
www.
DynaMetric
.com
Page 1 of 2
©DynaMetric 2001 Doc 44292
The CSP-2 is a Kit Consisting of:
1 TMP-636 Telephone Patch
1 CSP CD
1 Software Registration Code
The CSP-2 Telephone Recording & Playback Kit lets you to record and play back to
your telephone from your PC using the included Call Saver
®
Pro™ software. The TMP-
636 Telephone Recorder Patch connects to the telephone via the modular handset
connector as detailed below.
INSTALLATION INSTRUCTIONS
1 Unplug the coil cord from the base of the phone and plug it into the Handset jack on
the TMP-636.
2 Plug the short cable from the TMP-636 into the phone base where the coil cord was
plugged.
3 Insert the 3.5mm GREEN stereo plug into the speaker or headphone jack on the
sound card.
4 Insert the 3.5mm PINK stereo plug into the MIC jack on the sound card.
5 Insert the Call Saver Pro disk into your computer’s disk drive and follow the
automated instructions to install the software on your PC.
