Installation Instructions for Call Saver
®
Pro™
CSP-1 Telephone Recording Kit
FOR LEGAL USE ONLY
5/19/09
www.
DynaMetric
.com
Page 1 of 2
©DynaMetric 2001 Doc 44291
The CSP-1 Kit Consists of:
1 TLP-102 Telephone Patch
1 CSP CD
1 Software Registration Code
The CSP-1 Telephone Recording Kit lets you record your telephone calls on your
computer. It provides clear recordings of both sides of your phone conversations. The
TLP-102 Telephone Recorder Patch connects to the telephone via the modular handset
connector as detailed below.
INSTALLATION INSTRUCTIONS
1
Unplug the coil cord from the base of the phone and plug it into the Handset jack on
the TLP-102.
2
Plug the short cable from the TLP-102 into the phone base where the coil cord was
plugged.
3
Plug the pink plug on the long cable into the MIC jack on your computer.
4 Insert the Call Saver Pro disk into your computer’s disk drive and follow the
automated instructions to install the software on your PC.
Follow the instructions included in the Call Saver
®
Pro™ software for recording with
your PC.