STEP 1 :
To turn on the light and make sounds,
push the button as shown.
STEP 2 :
Remove the used batteries and insert
3 x 1.5V size AAA batteries as shown
in diagram at right.
Loosen the screw of the battery cover under
the Dino Grip.
STEP 3 :
Reverse above process to secure the
battery cover.
WARNING:
Do not let use of the light or
sounds features interfere with safe riding
or distract your child while riding. Never
take you hands off the handlebars while riding.
LIGHT-UP DINO GRIP
PLEASE KEEP THESE INSTRUC-
TIONS FOR FUTURE REFER-
ENCE AS THEY CONTAIN
IMPORTANT INFORMATION.
ASSEMBLY
HOW TO REPLACE BATTERIES
STEP 1 :
STEP 2 :
Unscrew the four screws in grip clamp.
STEP 3 :
Place the clamp on the handlebar and use four
4x12
screws to tighten it to the handlebar as shown.
Locate the Dino Grip that is tied to the bike frame,
and cut zip tie to remove.
Please also refer to the owner’s manual that came with your bicycle.
Due to potential exposure to small parts and sharp edges, attachment, detachment,
Battery removal and any other maintenance should only be done by an adult.
HOW TO USE
Pull the Plastic tag from the battery cover.
STEP 1 :
STEP 2 :
Plastic tag
4x12 srews
WARNING:
Make sure that the device is secure on the handlebar before riding or allowing you
child to ride. Failure to do so could result in a loss of control or fall.
DC 1.
5V (SI
ZE
AAA)
DC 1.
5V (SI
ZE
AAA)
DC 1.
5V (SI
ZE
AAA)
Button
