background image

9

10

PREVENT FIRE

•  Never modify the electrical system.
•  Alterations could cause a fire resulting in serious injury and could also ruin the 

electrical system.

•  Use of the wrong type battery or charger could cause a fire or explosion, 

resulting in serious injury.

•  Use of non-original components on this ride-on toy could cause overheating,  

fire or explosion.

•  The battery must be handled by adults only.
•  The battery is heavy and contains sulfuric acid (electrolyte).
•  Dropping the battery could result in serious injury.
•  Never allow children to charge the battery.
•  Battery charging must be done by adults only. A child could be injured by the 

electricity involved in charging the battery.

•  Never lift or carry the battery by the wires or connector, this can damage the 

battery and possibly cause a fire resulting in serious injury. Lift and carry the 
battery by the case only.

•  Read the safety instructions on the battery.
•  Examine the battery, charger and their connectors for excessive wear or damage 

each time you charge the battery.

•  If damage or excessive wear is detected, do not use the charger or the battery 

until you have replaced the worn or damaged part. 

 CAUTION:

  Use the charger in dry locations only.

IMPORTANT NOTE

•  We recommend that you start charging your battery before beginning assembly 

of your new ride-on toy.

•  The battery must be upright while charging.
•  The charger is not a toy. Keep away from children.
•  Do not short-circuit the battery.
•  You do not need to remove the battery from your ride-on toy to recharge it.
•  Before charging the battery, examine the battery case for cracks and other damage 

which may cause sulfuric acid (electrolyte) to leak during the charging process. If 
damage is detected, do not charge the battery or use it in your ride-on toy. Battery 
acid is very corrosive and can cause severe damage to surfaces  it contacts.Use 
only an original charger (AC 120V 60Hz) with an output of DC 6V (0.5A) to charge 
your ride-on toy battery.

• 

NOTE TO ADULTS:

  Regularly examine the charger for damage to the cord, plug, 

housing or other parts that may result in the risk of fire, electric shock or injury.

•  If your battery is old and will not accept a charge, do not leave it in the ride-on 

toy. Always remove a dead battery from the ride-on toy.

•  After the first charge, recharge the battery for at least 12 hours after each use. 

Never charge the battery longer than 30 hours. Charge the battery after each 
use, regardless of how long the ride-on toy was used.

10. BATTERIES INSTALLATION

NOTE:  

Batteries are not included.

•  Unscrew the screw from the battery cover 

and remove the cover.

•  Insert 2 pieces of 1.5AAA size AAA AM-3 

or LR6 batteries.

•  Replace the cover and tighten the screw 

and secure in place. 

 

 

Note: The screw angle is parallel                  
          to the ground.

DC 1.5V (SIZE AAA)

DC 1.5V (SIZE AAA)

-

+

-

+

BATTERIES SAFETY INFORMATION:

Batteries may leak fluids that can cause chemical burn, injury or ruin your product. 
To avoid battery leakage: 
•  Install batteries correctly, observing the polarity (+/-) signs to avoid leakage.
•  Do not mix old and new batteries.
•  Do not mix batteries of different types: alkaline, standard (carbon-zinc) or  

rechargeable (Ni-MH).

•  Remove the batteries from the battery compartment when the unit will not be 

used for an extended period of time.

•  Always remove exhausted batteries from the battery compartment.
•  Do not dispose of batteries in fire.
•  Do not short circuit the supply terminals.
•  Replace the batteries when the horn sounds become distorted.
•  Non-rechargeable batteries should not be recharged.
•  Use only batteries of the same or equivalent type as recommended.
•  If rechargeable batteries are used, they should only be charged by an adult.
•  Remove rechargeable batteries from the product before charging.
•  Battery chargers used with toys must be examined regularly for damage to the 

cord, plug, enclosure and other parts. In the event that such damage is found, 
the toy must not be used with the battery charger until the damage has been 
repaired.

BATTERY CHARGING

IMPORTANT!

 Before first time use, charge the battery for at least 18 hours. Charge 

the battery for at least 12 hours after each use of the ride-on toy. Never charge 
the battery longer than 30 hours. Overcharging or undercharging the battery may 
shorten battery life and decrease ride-on toy running time.

 WARNING:

  Battery can fall out and injure a child if the ride-on toy tips over.    

 

 

      Always use battery retainer.

Summary of Contents for BMW S1000 RR E-TRIKE 6V














Reviews: