MXE DSP Matrix Mix Engine Series
Controls, indicators, and connections | en
13
Bosch Security Systems, LLC
Installation manual
2020-08 | V04 | F.01U.352.860
5
Controls, indicators, and connections
5.1
Front panel
MXE5
1.
Audio inputs 1-12 metering (green = signal present, red = clip) and phantom power (+48
V) indication
2.
OLED display
3.
Navigation buttons: up, enter, and down for menu navigation and parameter editing
4.
MXE status information: POWER, STANDBY, FAULT, OMNEO present
5.
Audio outputs 1-8 metering (green = signal present, red = clip/limit)
5.2
Rear panel
MXE5
1.
Power switch
2.
Status LED
3.
Control ports (GPIO)
4.
Line outputs 1-8
5.
Mic/line inputs 1-12
6.
Mains power connector
7.
OMNEO/OCA control port (no multicast audio)
8.
OMNEO/Dante/OCA primary and secondary ports
5.3
Control port
The control port features eight GPIOs (general purpose inputs & outputs), ready/fault
contacts, and 10 V reference pins. It is equipped with a 15-pin Euroblock-type
connector. The eight GPIOs are configurable for either control inputs or control outputs.
Control inputs can be defined by the user to change device and system parameters, for
Summary of Contents for MXE Series
Page 1: ...MXE DSP Matrix Mix Engine Series MXE5 en Installation manual...
Page 2: ......
Page 23: ......
