D 11A
7
13 O
UTPUT
CONNECTOR
FOR
AUDIO
SIGNAL
(LINE THRU)
This electronically balanced output
provides the carried through audio
signal from the LINE IN connector.
It can be used to feed additional
external equipment (e.g. an addi-
tional D 11A) with the identical in-
put signal.
14 O
UTPUT
CONNECTOR
(MASTER OUT)
The output connector provides the
Master Signal (Line+Mic+Aux) for
”carrying through“ the input signal.
The level of the output signal is in-
dependent of the setting of the
Master level control (”Pre Fader”).
2.2 Cabling
For connecting audio signal sources to the D 11A, we rec-
ommend using cable with balanced XLR-type or stereo
phone plug connectors. Using balanced cable reduces the
risk of sound degradation resulting from interference.
However, make sure to mind the pin-assignment as shown
below. Original DYNACORD cable from our accessory pro-
gram will always comply with this pin-assignment.
Illustration 2-1: Balanced and unbalanced phone plug
BALANCED
SHIELD
COLD
HOT
UNBALANCED
SHIELD
HOT
Illustration 2-2: Balanced XLR male
Illustration 2-3: Balanced XLR female
1, SHIELD
3, COLD
2, HOT
1, SHIELD
2, HOT
3, COLD
Cable
Application
balanced connection of microphones
unbalanced
external equipment with XLR-type in/output jacks
balanced
external equipment with XLR-type in/output jacks
unbalanced
external equipment with phone jack in/output jacks
balanced
external equipment with phone jack in/output jacks
2
3
1
1
3
2
2 HOT (+)
1 SHIELD
3 COLD (-)
2 HOT (+)
1 SHIELD
3 COLD (-)
-
+
cold
hot
shield
1
3
2
Cable connection phone to XLR-type, unbalanced
2
3
1
+
hot
cold
-
shield
Cable connection phone to XLR-type, balanced
+
hot
cold
-
shield
Standard phone-type, balanced
