3.
After inserting the Smart Card, you should refer to its documentation
and also check the configuration in Windows to ensure that it is
correct.
Wireless WAN device
Some models are equipped with the Wireless WAN device. This device
enables a high-speed connection to the Internet, corporate intranet, and
your email while you are away from the office.
Installing a SIM card
To install a SIM card, do the following:
1.
Click
Start -> (Power)
, and then select
Shut down
and ensure that
the
Power
indicator is off.
2.
Remove the AC adaptor and all cables and peripherals connected to
the computer.
3.
Locate the SIM card slot.
4.
To pop the SIM card tray partially open, insert a slender object (about
10mm, diameter 0.8mm), such as a straightened paper clip, into the
eject hole. Gently pull to open the SIM card tray.
5.
Place the SIM card into the SIM card tray with the metal connectors
facing down.
6.
Insert the SIM card tray into the SIM card slot, and push the center of
the tray to close it. Press gently until it locks into place.
Figure 4-5 Installing the SIM card
1
2
3
4
Nano SIM
1. SIM card slot
3. SIM card tray
2. Slender object (diameter 0.8mm)
4. SIM card
Never allow metal objects, such as screws, staples and paper clips, to
enter the computer. Foreign metal objects can create a short circuit,
which can cause damage and fire, possibly resulting in serious injury.
User's Manual
4-16
Summary of Contents for TECRA A30-J
Page 1: ...User s Manual TECRA A30 J ...
