dynabook TECRA A30-J Page 24 User Manual Download

Page: 24 / 124

Chapter 2

Getting Started

This chapter provides an equipment checklist, and basic information to
start using your computer.

If you use an operating system that was not pre-installed by Dynabook,
some of the features described in this manual might not function properly.

You might not have all the software mentioned in this manual depending on
the model you purchased.

Equipment checklist

Carefully unpack your computer, taking care to save the box and
packaging materials for future use.

Hardware

Check to make sure that you have all the following items:

Portable Personal Computer
USB-C™ to VGA Adapter (provided with some models)
AC adaptor and power cord (2-pin plug or 3-pin plug)
Cleaning cloth (provided with some models)

Documentation

Quickstart
Instruction Manual for Safety and Comfort
Warranty Information

If any of the items are missing or damaged, contact your dealer
immediately.

Conventions

This manual uses the following formats to describe, identify, and highlight
terms and operating procedures.

User's Manual

2-1

Summary of Contents for TECRA A30-J





























































































































Search results

Summary of Contents for TECRA A30-J

Reviews:

Related manuals for TECRA A30-J

Brands by name

Popular brands

dynabook TECRA A30-J, User Manual

Search results

Summary of Contents for TECRA A30-J

Reviews:

Related manuals for TECRA A30-J

Brands by name

Popular brands