dynabook PORTEGE X40-K Page 40 User Manual Download

Page: 40 / 141

Chapter 3

The Grand Tour

This chapter identifies the various components of the computer. It is
recommended that you become familiar with each before you operate the
computer.

Legal Footnote (Non-applicable Icons)
For more information regarding Non-applicable Icons, refer to the

Legal

Footnotes

section.

Handle your computer carefully to avoid scratching or damaging the
surface.

The Grand Tour for PORTEGE Series

Front with the display closed (PORTEGE Series)

The following figure shows the front of the computer with the display panel
in the closed position.

Figure 3-1 Front of the computer with display panel closed (PORTEGE Series)

1. Stereo speakers

Stereo speakers

The speakers emit sound generated by your
software as well as audio alarms, such as low
battery condition, generated by the system.

Left side (PORTEGE Series)

The following figure shows the left side of the computer.

User's Manual

3-1

Summary of Contents for PORTEGE X40-K














































































































































Search results

Summary of Contents for PORTEGE X40-K

Reviews:

Related manuals for PORTEGE X40-K

Brands by name

Popular brands

dynabook PORTEGE X40-K, User Manual

Search results

Summary of Contents for PORTEGE X40-K

Reviews:

Related manuals for PORTEGE X40-K

Brands by name

Popular brands