Maintenance Manual (960-948)
4-30
Replacement Procedures
Figure 4-31 Installing the dual button unit/Click pad (3)
8. Stick a new
DUAL BUTTON INSU
to the dual button plat in place.
9. Connect the
Dual button FPC
to the connector on the Click Pad.
10. Connect the
Click Pad FFC
,
Fingerprint FFC
and
Accupoint FPC
to
the connector on the Click Pad.
4.24 Keyboard
4.24.1 Removing the Keyboard
To remove the keyboard, follow the steps below.
1. Peel off the INSU KB.
Figure 4-32 Removing the keyboard (1)
As the keytop may fall out, when handling the keyboard, always hold it by
the frame and do not touch the key top.
INSU KB
