PEB-4720 Main Board
16
VFD Customer Display Installation
An optional VFD customer display can be installed on the back of Model H700.
Rear view with VFD attached.
Installing a VFD
1. Turn off system power.
2. Important, make sure that the jumpers on the secondary I/O board 9000PB0710 are set
correctly. It's important to note that the supply voltage for the VFD customer display is set to
+12V. If an LCD customer display is chosen, please change it to +5V.
3. Please refer to the section “9000PB0710 secondary I/O board” for jumper information.
4. Remove the VFD Mounting
Cover from the base.
5. Secure the VFD Holder to the
base with 3 screws and place
VFD display into the holder.
