Dymo LabelManager 210D, User Manual

Page: 9 / 13

7
Troubleshooting
Review the following possible solutions if you encounter a
problem while using your label maker.
If you still need assistance, contact DYMO Customer
Support at https://support.dymo.com.
Problem/Error
Message
Solution
No display

Ensure the label maker is turned
on.
 Replace discharged batteries.
Poor Print Quality
 Replace batteries or attach power
adapter.

Set Contrast to higher level. See
Adjusting the Print Contrast.
 Ensure label cassette is installed
properly.

Clean the print head.

Replace the label cassette.
Poor Cutter Performance Clean the cutter blade. See See
Caring for Your Label Maker on
page 6.
Printing . . . No action required.
Message disappears when printing is
finished.
Too many characters
Exceeded maximum
number of characters in
buffer.
Delete some or all of the buffer text.
Too many lines
Exceeded maximum
number of lines

Delete a line to fit on the label
width.
 Insert a wider label cassette.
Batteries almost
discharged.
Replace batteries or connect AC
power adapter.
Tape Jam
Motor is stalled due to
label jam.
 Remove jammed label; replace
label cassette.

Clean cutter blade.