5
UVCS LED Light-Curing Conveyor Systems User Guide
Product Overview
Description of UVCS LED Light-Curing Conveyors
Dymax UVCS LED light-curing conveyor systems use high-intensity light sources for fast curing of light-
curable materials. UVCS bench-top conveyors can be outfitted with BlueWave® AX-550 LED flood systems
available in one of three different wavelengths (365, 385, or 405 nm). The flood system consists of two
main components: an LED flood array and a power supply that contains the user interface. Up to four LED
flood arrays can be mounted on the conveyor.
BlueWave® AX-550 flood systems feature an intensity adjustment, allowing the output intensity level to
be adjusted from 10 to 100% to meet process and adhesive requirements. LED technology within the
BlueWave® AX-550 allows for instant on/off activation without the need for a warm-up period and is also
rated for continuous operation. A switch on the conveyor is provided to keep the LED array always active.
Fans on the BlueWave® AX-550 provide cooling and must not be covered or blocked. Thermal sensors in
the system shut the unit down to protect the components if the internal temperature exceeds maximum
limits. Please refer to the
BlueWave® AX-550 Flood System User Guide
for further description and
explanation.
All UVCS conveyors have adjustable belt speeds and lamp-to-belt distance to address a variety of
application requirements. Standard height clearance is from 1.5 to 4.5 inches; optional risers increase
clearance to either 6.5 or 10.5 inches.
Due to the weight of the BlueWave® AX-550 systems, all two and four flood system configurations have a
counterbalance strut installed for ease of height management.
When combined, the UVCS conveyors’ consistent intensity, fast curing, and adjustable line speeds cre
ate
an optimized light-curing process that enables high throughput.
Features & Benefits
Features
Complete UV shielding
Built-in exhaust fans with optional stack
Controlled and consistent cure times
Multiple configurations of LED systems available
Accepts parts up to 12" x 36"
Accurate digital belt control and readout
4.5", 6.5", or 10.5" vertical clearance available
Adjustable array-to-belt distance
12" belt width (guides available to channel parts into
center 6")
Bench-top conveyor (with optional transportation carrying
cart)
