BlueWave® QX4® User Guide
16
Operation
WARNING!
Looking directly at the high-intensity light emitted
by the heads of the BlueWave QX4 can result in eye injury. To
prevent eye injury, never look directly at the high-intensity light
and always wear protective goggles (provided).
Verify that all connectors are firmly plugged
into the rear panel of the unit. See
System
Connections
, pg. 13 for more details.
On the rear panel of the controller, move the
Power Switch to the on position (I). The
system is now ready for use.
Upon startup of the unit, the main menu
screen should appear in the display. The main
menu displays the two working modes of the
unit as well as the system settings. Hold down
the left button for longer than one second to
bring the display back to the main menu page.
Figure 9. Main Menu Screen
Constant Mode
Constant mode allows the user to configure
each head at a predefined (constant) power
output for a given amount of time. Each head
can be adjusted independently of each other.
To enter constant mode, use the up and
down buttons to highlight constant
mode on the main menu screen. Press
the right button to enter.
Figure 10. Select Constant Mode
