BlueWave® MX-Series 1 Channel Curing Systems User Guide
7
equipment must be
disposed of or recycled at
the nearest collection
facility)
Specific Safety Considerations
The
BlueWave
MX-Series curing systems
are designed to maximize operator safety and
minimize exposure to light-curing energy. To use the unit
safely, it must be set up and
operated in accordance with the instructions in this user guide. Please also read and
understand the safety considerations unique to LED-curing systems as described below.
NOTE: Risk Group 3. Product tested against IEC62471.
WARNING!
Looking directly at the high-intensity light emitted by the
BlueWave MX-150 or MX-250 can result in eye injury. To prevent eye injury,
never look directly at the energy-emitting end of the high-intensity emitter and
always wear protective goggles.
WARNING!
UV emitted from this product. Avoid eye and skin exposure to
unshielded product.
CAUTION!
Possibly hazardous optical radiation emitted from this product.
Do not stare at the bright light energy emitting from the unit. May be harmful
to the eye. To avoid accidental exposure, always point the emitter and/or
lightguide away and at the curing substrate.
WARNING!
Possibly hazardous optical radiation emitted from this
product. Do not look directly at the light energy emitting from the unit. Eye
injury may result. To avoid accidental exposure, always point the emitter
and/or lightguide away and at the curing substrate.
WARNING!
The controller is cooled by natural convection. If you block the
air flow from the controller, equipment damage and malfunction can result. To
prevent damage and malfunction, ensure adequate space around controller
vents to allow the free flow of air. Typically, 1.5 in (38 mm) of space around all
sides of the controller is sufficient.
WARNING!
Surface of light emission optics is very hot after continuous use
of MX-150 or MX-250 emitter. Do not touch the distal, light-emitting end of
the
MX-150 lightguide-simulator optic or the MX-250 glass window. Touching
