6
USE R GUI DE
|
BL UE WAVE
®
A X -5 5 0
Unpacking
Unpacking and Inspecting Your Shipment
Upon arrival, inspect all boxes for damage and notify the shipper of box damage immediately. Open each box and check for
equipment damage. If parts are damaged, notify the shipper and submit a claim for the damaged parts. Contact Dymax so that
new parts can be shipped to you immediately.
The parts below are included in every package/order. If parts are missing from your order, contact your local Dymax
representative or Dymax Customer Support to resolve the problem.
Inspect the glass for any damage or residue on the surface. Carefully clean the glass with the alcohol swab. Take care not to
touch the glass with bare hands, as any residue left on the window can adversely affect performance on the unit.
NOTE: The BlueWave AX-550 power cord requires a snap-on EMI Filtering Ferrite Core located near the plug end of the cord.
The ferrite core may be factory installed (with optional wire tie
–
not required).
Reference Quick Start QS101 “BlueWave AX
-
550 V2.0 Power Cord Ferrite Core Installation In
structions” for specific wire routing and installation procedure.
Parts Included
•
BlueWave AX-550 Controller
•
BlueWave AX-550 Emitter (RediCure, PrimeCure, or VisiCure,
model as selected at time of purchase)
•
Power Cord
•
EMI Filtering Ferrite Core (Assembly Required)
•
BlueWave AX-550 LED Flood System User Guide
(document not shown)
•
Terminal Block (Plugged on the BlueWave AX-550 Controller)
•
Footswitch
•
Safety Eyewear
Figure 2.
System Packaging
Figure 3.
Components of the BlueWave AX-550 Curing System
Controller Packaging
Emitter Packaging
Footswitch (CE Compliant)
