Page
15
Step
【
4
】
Cable Management
Ensure Wall Mount LCD Arm Assembly is fully extended before connecting cables.
Exercise caution when attaching or removing the display to avoid personal injury or
damage to equipment. Disconnect power before removing the display.
Note:
Be sure to leave enough slack in the cables to allow for movement of the arms.
Installing Cable Management
1. Connect cables to display monitor. Adjust the display to its fully extended position to
ensure that there is sufficient cabling at the end of the Arms so that the cables are not
stretched or pulled out when the display is moved (
See Figure 4-1
).
2. Feed the cables through the cable bracket entry slot on the underside of the arms as
shown (
See Figure 4-2
).
Figure 4-1
Figure 4-2
