Page
11
Step
【
2
】
Display Installation
Using improper screws or screw size may damage your display. If spacers are required,
be sure to use screws of the correct size. Proper screws will easily and completely thread
into the display mounting holes. Inadequate thread engagement in the display may cause
display to fall.
It is the installer
’s responsibility to make sure the combined weight of all components does
not exceed weight capacity of 17.6lbs (8Kg). Exceeding weight capacity can result in
severe personal injury or damage to equipment.
Wall Mount LCD Arm will only work when a display is properly installed.
Note
: All Spacers or Screws used should be the same length.
Attaching the Display
1. Ensure Tilter Mount Bracket of Wall Mount LCD Arm Assembly is able to swivel and tilt
easily. Adjust, if necessary, before proceeding to next step.
2. Carefully place the display face down on protective surface (
See Figure 2-1
).
Figure 2-1
