Page 8
Figure 1-7
Figure 1-6
Step
【
1
】
Masonry Wall Installation
Drilling into electrical wires or cables can cause serious personal injury! Always make
certain area behind mounting area is free of electrical wires and cables before drilling or
installing.
Improper installation can lead to mount falling causing severe personal injury or damage
to equipment. It is the
installer’s responsibility to make sure the combined weight of all
components does not exceed the maximum weight capacity of 17.6lbs (8kg) per arm. The
manufacturer accepts no responsibility for incorrect installation.
Masonry Wall Installation
1. Place the Wall Plate
(3)
on the wall and mark the pilot holes (
See Figure 1-6
).
2. Ensure that the pilot holes are straight and centered.
Proceed to drill pilot holes 2.36”
into wall (
See Figure 1-7
).
Masonry Pilot
Pilot hole size
Pilot Drill Depth
5/16"
2.36"
10mm
60mm
