background image

- 1 -

INSTALLATION INSTRUCTIONS

SA

VE FOR FUTURE USE

Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2017

RECOMMENDED TOOLS AND MATERIALS

Most of the procedures require the use of common tools and materials, which are available from hardware and plumbing 
supply stores. It is essential that the tools and materials be on hand before work has begun.

M965538 Rev. 1.6 (4/17)

Model D35402300

Victorian

  

Single Control Kitchen Faucet

with Pull-Down Spray

ROUGHING-IN DIMENSIONS: 

• For reference

Plumbers' Putty or Caulking

Adjustable Wrench

Phillips Screwdriver

Channel Locks

Flat Blade Screwdriver

NOTE: Bore hole size is 1-3/8"

SPRAY HOSE

WEIGHT

17-21/32"

(451 mm) 

9-9/32"

(235 mm)

3/8"

COMPRESSION

2-1/4" D.

(57 mm)

8-3/32"

(210 mm)

2-3/16"

(53.8 mm)

In the United States:

DXV

One Centennial Avenue 

Piscataway, New Jersey 08855

Attention: Director of Customer Care

For residents of the United States, warranty 

information may also be obtained by calling 

the following toll free number: (800) 227-2734

www.DXV.com

In Canada:

DXV 

5900 Avebury Road  

Mississauga, Ontario  

L5R 3M3 

Canada

Toll Free: 1-800-387-0369

Local: 905-306-1093 

Fax: 1-800-395-1498 

www.DXV.ca

In Mexico:

DXV 

Via Morelos 330 

Col. Santa Clara Coatitla  

Ecatepec, Estado de México 55540

Toll Free: 01-800-8391200

www.DXV.mx

Thank you for selecting DXV. To ensure that your 
installation proceeds smoothly, please read these 
instructions carefully before you begin.

Summary of Contents for Victorian D35402300

Page 1: ...de Screwdriver NOTE Bore hole size is 1 3 8 SPRAY HOSE WEIGHT 17 21 32 451 mm 9 9 32 235 mm 3 8 COMPRESSION 2 1 4 D 57 mm 8 3 32 210 mm 2 3 16 53 8 mm In the United States DXV One Centennial Avenue Piscataway New Jersey 08855 Attention Director of Customer Care For residents of the United States warranty information may also be obtained by calling the following toll free number 800 227 2734 www DX...

Page 2: ...ON RING 7 Assemble SUPPORT PLATE 5 METAL WASHER 6 and FIXATION RING 7 onto SHANK 10 from underside of sink Hand tighten the FIXATION RING 7 and check that FAUCET 1 is centered Use a screwdriver to tighten SCREWS 8 on FIXATION RING 7 Work your way around FIXATION RING 7 tightening the SCREWS 8 slightly each time until all are snug to ensure even pressure CAUTION Turn off hot and cold wate supplies ...

Page 3: ...ray will not remove from faucet freely Check that pull out spray hose is not obstructed with plumbingconnections or fittings under faucet Make sure hose is not twisted or bound in faucet body Turn off hot and cold water supplies before beginning Connect FLEXIBLE SUPPLIES 6 7 directly to wall supplies Connection on fitting supplies are 3 8 compression Connect left supply Marked Red to Hot and right...

Page 4: ...t with Pull Down Spray MODEL NUMBER D35402300 M964395 0070A WEIGHTS H962078 191 CARTRIDGE NUT H961342 XXX HANDLE KIT H962019 XXX HANDLE FIXATION M964406 0070A CARTRIDGE M964665 YYY0A SPOUT SUB ASSEMBY M964669 YYY0A ESCUTCHEON KIT M964667 0070A MOUNTING KIT M964745 YYY0A PULL DOWN SPRAY M964668 YYY0A DECORATIVE RING KIT M964967 1000A NYLON SPRAY HOSE WITH SEALS ...

Reviews: