9
2.5 Setting the camera’s DIP switch
To access the camera’s DIP switch, open the DIP switch cover at the bottom of the
camera and change the setting of the DIP switch as needed. Once the
settings are
updated,
close the cover tightly to ensure waterproofing.
S1
S2
1.
Control the camera’s video signal and video type using D1 and D2, respectively, in
the S1 switch.
S1-
D1
Video signal
S1-
D2
Video type
OFF
HD-TVI output
OFF
NTSC
ON
HD-Analog
Output
ON
PAL
2.
Set the camera’s CVBS output with D1 in the S2 switch.
S2-
D1
WDR
type
WDR
off/on
CVBS
output
HD
output
Off
True
WDR
Off
Enabled
Enabled
On
Disabled
Enabled
On
Digital
WDR
Off
Enabled
Enabled
On
Enabled
Enabled
3.
Set the coaxitron protocols using D3 and D4 in the S1 switch.
S1-
D3
S1-
D4
HD-TVI output
HD-Analog output
OFF
OFF
HD-TVI-C
A_CP-PTZ
ON
OFF
Pelco-C
Reserved
OFF
ON
Reserved
Reserved
ON
ON
Reserved
Reserved