6
Chapter 2 — Installation and configuration
2.1 Package contents
Make sure the following are included in the box with your camera:
•
1x PTZ camera
•
1x quick setup and download guides
•
1x mounting plate
•
1x mounting template
•
1x safety wire
•
Mounting accessory kit
1.
4x mounting screws (PH6 x 35.0)
2.
4x plastic anchors
3.
4x O-rings
4.
1x hex Allen wrench
•
Cabling connectors
1.
1x 2-pin terminal block
2.
1x 3-pin terminal block
3.
1x 4-pin terminal block
4.
1x 5-pin terminal block
NOTE: Check your package to make sure that you received the complete system,
including all components listed above.
NOTE: Adaptor for 12VDC and 24VAC is not supplied.
NOTE: The camera requires a mounting accessory, sold separately.
2.2 Preparing the installation
1.
The mounting surface must withstand five times the camera weight.
2.
Do not let the cables get caught in improper places or the electric line cover can be
damaged. This may cause a short or fire.
3.
Using the camera or mounting template, mark and drill the necessary mounting
holes in the mounting surface.
NOTE: the camera requires a mounting accessory, sold separately.