28
3.12.3 ORIGIN OFFSET
OFFSET SETUP
(CTRL KEY)
PAN OFFSET : 000.0
TILT OFFSET : 000.0
ENABLE : OFF
SAVE AND EXIT(ESC TO CANCEL)
This feature is useful to align a new PTZ camera the same as the previously installed
PTZ camera.
PTZ camera’s origin set and all data initialize option do not override offset values.
Only the default settings option in this menu will set the offset value to zero. This can
be used to avoid ceiling obstructions.
3.12.4 FACTORY DEFAULT
Select “FACTORY DEFAULT” to initialize the data.
FACTORY DEFAULT
ARE YOU SURE ?
CANCEL
OK
3.12.5 PTZ RESET
PTZ RESET
ARE YOU SURE ?
CANCEL
OK
This feature is used to re-calibrate the orientation of a selected PTZ camera. The
origin offset value is not affected by this function. (Offset is still valid after origin set.)