DVTEL CT-5322F, User And Installation Manual

Page: 70 / 88

CT-5322F/CT-5642F User and Installation Guide
56
Field Description
H264 RTP/RTSP/
HTTP Port
Enter the port used for H.264 RTP/RTSP/HTTP communication.
MJPEG Multicast
Streaming IP
Address Enter the multicast streaming address. Valid range for multicast IP address
is between 224.0.0.0 and 239.255.255.255. Typical multicast IP address is
239.x.y.z
MJPEG Multicast
Streaming Port Enter the multicast streaming port number. Port number can vary between
1 and 65535. Default value is 6001.
MJPEG Quality
Select the appropriate bit rate for MJPEG video by using the slider. The
available range is 1% to 98%.
MJPEG Frame Rate
From the drop-down list, select a frame rate from 1-9 FPS or
CT-5XXX-9-YYF or 1-30F FPS for CT-5XXX-30-YYF.
MJPEG MTU
(bytes)
Enter the MTU setting. See H264 MTU explanation above.
MJPEG RTSP Port Enables setting a custom port for RTSP streaming.
MJPEG RTP/RTSP/
HTTP Port Enter the port number used for MJPEG RTP/RTSP/ HTTP port
communication.
3. Click Save Changes .
Video Settings
The Video Settings screen is used to define the color and details you want to display in the On-Screen
Display.
To configure video settings
1. From the Setup > Camera screen, select Video Settings . The Video Settings screen opens.
Figure 64: Video Settings Screen
2. From the Select Color Palette drop-down list, select the color or effect for viewing the thermal
image.
3. To display today’s date, check the Show Date checkbox.
4. To display the current time, check the Show Time checkbox.
5. To display text in the On-Screen Display, enter the text in the OSD Text text box.
6. Click Save Changes .