Base bracket
The arms are connected to the base by adjustable friction joints. If necessary, use the supplied Allen
wrench to adjust the friction.
The
MultiRig
is a modular
convertible camera support that can
be configured in many ways to
adapt to many uses and shooting
styles.
www.dvmultirig.com [email protected] www.dvtec.tv
Thank you for choosing the
MultiRig
camera support.
Joints Adjustment
The arms and grips are designed for effortless uncomplicated minor modifications during shoots.
Do not over tighten them, Try the rig in real shooting conditions first.
Unfolding the MultiRig
Place the rig on a flat surface with the foam grips up. Lift the grips up then swing and spread the side arms
to clear the way for the front arm, No swing the front arm to the right and lift the grip to a vertical position.
Turn the rig and position it on the grips.
Locate the locking mechanism at each grip/arm joint and practice moving it. To release, move the grip to
the center of it’s slack, release the lock by pressing the brass lever with your thumb, move the grip.
DvMultiRig
Patent Pending
DVTEC
Hot shoe
Right Grip
Left Grip
Shoulder
Bar
Inner Tube
Left Arm
Front Arm
Back Bar
Support Pod
w / Flexi Tip
Shoulder Brace
Lock
Acc.+ Cam
plate
adaptors
Acc. Plate
3/8
adaptor
Base
bracket
Right Arm
Holster
3/8” support pod
threads
Allen
wrench
Back Bar
