DVS SpycerBox Flex, Hardware Manual

Page: 15 / 84

1-7 SpycerBox Ultra/Flex | Hardware Guide | Version 3.1
Rohde & Schwarz DVS GmbH
Introduction
 Safety Instructions

The R&S DVS system must not be misused, abused, physically
damaged, neglected, exposed to fire, water or excessive changes in
the climate or temperature, or operated outside maximum rating.

Do not perform any changes or extensions to the R&S DVS system
whatsoever.
Transportation
The SpycerBox is a very sensitive device. Especially the hard disks of
the system must be handled with great care. Therefore, observe in case
of transportation:

Handle the R&S DVS system with great care.

Always use the original packing or a similar structured packing for
transportation as detailed in section “Packing Instructions” on
page A-8.

Avoid shocks or vibrations during transport. For longer distances it
is recommended to use a lifting truck.

Keep the R&S DVS system as a transportation good dry.

In the warranty period you have to keep the original packing and
use it in case of transportation.
Environmental Conditions
For error-free working and a long service life the SpycerBox needs
some basic environmental conditions:

Do not expose the R&S DVS system to sources of heat, such as
direct sunlight or a radiator.

Do not cover or obstruct the ventilation holes of the system.

When installing the R&S DVS system in a rack, take care that
warmed up air is conducted to the rear of the rack and properly
vented away.

Avoid areas with high humidity or dust. Best operating conditions
are given in an air-conditioned site.

Do not expose the R&S DVS system to strong electric or magnetic
fields.

Avoid areas where the R&S DVS system will be subject to vibrations
or shocks.