DVS Pronto4K, Hardware Manual

Page: 20 / 74

2-2
Pronto4K Hardware Guide
2.1 Overview of the Front
This section gives an overview of the front of the DVS system. After an
overall overview of the front the operable front panel at the top of the
system will be described first. This will be followed by descriptions of
the faceplate and the hard disk array. The section will be concluded
with some explanations about the DVD drive.
2.1.1 The Front of the System
This section provides an overview of the front of the system:
Figure 2-1: Overview of the front
operation items With the operation items the system can be con-
trolled (e.g. turned on or off). Additionally, they of-
fer some LEDs that allow you to assess the state of
the DVS system as well as USB connectors for an
easy connectivity of additional devices such as
memory sticks. Further information about the op-
eration items can be found in section “Operation
Items” on page 2-3.
HDD LEDs The upper part of the front is equipped with LEDs
that indicate the statuses (activities) of the hard
disks of the hard disk array. Further information
about the LEDs and their meaning can be found in
section “HDD LEDs” on page 2-4.
DVD drive
faceplate/
HDD LEDs operation items hard disk array