DVS Cine4K, Hardware Manual

Page: 37 / 74

4-1
2
1
3
4
5
4
I
A
Operation
This chapter describes how to operate the Cine4K hardware, i.e. it is ex-
plained how to start the system and how to shut it down. For both pro-
cedures you have to use the power switch of the operation items on the
front of the system.
Figure 4-1: The power switch
4.1 Starting the System
After a proper installation of the system (see chapter “Installation” on
page 3-1) you may start the Cine4K at any time.
To start the system perform the following:
y
Press the power switch briefly to turn on the system.
The system will be started and the DVS logo in the middle of the face-
plate lights up. As with any standard computer after initial booting, the
system begins to load the installed operating system. When the oper-
ating system has finished its loading, you can begin to work with the
Cine4K right away.
All other items necessary for a correct operation of the Cine4K
hardware, such as the LEDs or the reset button, are described
in chapter “Overview” on page 2-1.
power switch