background image

1-1

1

1

2

3

I

4

A

Introduction

This documentation describes Atomix LT, a high-end uncompressed 
video and audio I/O hardware manufactured by DVS.

Atomix LT is centered around the Atomix LT board, a 2/3-length PCIe 
bus single board for a real-time input and output of uncompressed vid-
eo and audio signals. All major video and film formats are supported 
from SD video up to 2K film via SDI I/O, supplemented by up to 
16 channels audio either over AES/EBU or embedded in the video 
stream. With the help of the DVS software development kit (SDK) you 
can build your own powerful video and film solutions, for example, for 
HDTV post production or broadcast applications.

For Atomix LT there are two variants of PCI video boards available: one 
providing 5 BNC connectors on its slot panel (called Atomix LT) and 
one providing 4 BNC and a VGA-style connector (called Atomix LT 
4 BNC).

Key Features

– Capture and play-out of uncompressed video via two 3-Gbit/s SDI 

ports

– Two independent video channels with independent input and out-

puts

– Programmable up-/downscaler for format adjustments
– Mixer/keyer
– 1D LUT for range and gamma changes
– Low latency between input and output
– 16 embedded and 16 AES/EBU audio channels (Atomix LT 4 BNC: 

8 AES/EBU audio channels)

– LTC input and output
– 2 × RS-422 for remote control
– Watchdog to switch SDI input to output in case of failure
– Drivers and SDK for Windows, Linux and Mac OS
– Sophisticated SDK, compatible among DVS video boards
– Highly skilled and qualified support, from developers for developers
– Optional breakout box (not for Atomix LT 4 BNC) with

– 2 × RS-422

Summary of Contents for Atomix LT









































































Reviews: