-5-
3 .0
PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make certain
the following items are contained in each shipping carton:
(3-1)
• 1x Transmitter (DVI-7365-TX) or Receiver (DVI-7365-RX) unit
• 1x User Guide
• 1x External AC Power Adapter (+12 VDC)
• 1x 3-pin 3.5mm Pitch Phoenix Connector (Phoenix p.n. 1840379)
• 1x IR Transmitter (with TX Unit) or IR Receiver (with RX Unit)
• 2x Mounting Brackets (attached to units)
• 4x Rack Mounting Screws
Note 3-1:
The Transmitter and the Receiver Units are sold individually. Please retain the
original packing material should the need ever arise to return the unit. If you find any items
are missing, contact your reseller or DVIGear immediately. Please have the Model Number,
Serial Number, and Invoice Number available for reference when you call.
4 .0 CONNECTING THE HARDWARE
An extension set consists of a Transmitter Unit and a Receiver Unit. Please see
the following photos for information on the connections and controls.
Transmitter Unit (DVI-7365-TX) – Front View
Receiver Unit (DVI-7365-RX) – Front View
1 Power LED:
Lights red when power is applied.
2 Link:
LED lights blue whenever an operational fiber link is present.
3 Hot Plug Detect (HPD) LED:
Lights blue on both the TX and RX when
a Monitor is connected to the RX and a fiber link is present.
4 Ethernet LED:
Lights blue to indicate Ethernet traffic.
5 EDID LED (TX Only):
See section 5.0 for details on this LED.
6 EDID Learn Button (TX Only):
See section 5.1 for details on learning an EDID.
3
1
2
5
6
3
1
2
